LED Display Board (Wall hang type) (TW-GLF4836-7P)

Product Name: LED Demo Case
Model: TW-GLF4836-7P Wall hang type
Function: Test & Demo LED lamps
Meter (AC): Voltage, Current, Power, Power factor,
Frequency, Annual Power consumption, ...etc
Meter(DC): DC Power
Material: Aluminum alloy, MDF, Acrylic etc.
Certificate: CE, RoHS
Case size: L48*W36*H6(unit: Cm)

Load sockets:
GU10-E14-MR16-E26/27, etc
(Sockets can be amended based on customer`s requirments)

Specification:

1. The case internal circuit: Strictly distinguish for AC and DC; AC socket (- AC) interface can test the electric parameters are as follows: Voltage, current, power.

2. DC (- DC) part of the parameter display: DC lamp holder (- DC) interface data displayed in the DC POWER, such as MR16. DC voltage in the box internal is transformed into 12 V output to light sit interface.
3. Parameters for GU10, E14, E26/ E27 /B22/G24 and so on can be tested (voltage, current, power, )

4. Design for dimmable: Dimmable engine and Dimmable switch; There are two positions for dimmable switch-DIMMBALE and NON-DIMMABLE. When put the switch on dimmable position, the brightness for all dimmable lamps can be adjusted. When put the switch on Non-dimmable position, all the dimmable lamps can't be adjusted. So it can be tested that if the brightness of the lamp can be adjusted.

5. Three wire clamps (2 PCS AC output and DC 12 output) and one AC output universal socket. It's convenient for external power source. Every lamp socket has a unique switch and mark, which is convenient for identification and control.

6. One storehouse is for LED lights samples and accessories.

1, AC voltage Parameter: Input voltage can be displayed; Support international use; Voltage ranges from 86~264V. Overseas voltage can be shown for overseas use.

2, AC current parameter: Input Current can be displayed. The measurement for current is accurate to mA. The accuracy is about 1/1000. The measuring range is 4A.

3, AC Power parameter: AC power display area: Power can be displayed. Power meter is correct to 1 decimal point. So, it can show the change and contrast of power correctly. The ultimate power is 999.9W. If it surpasses 999.9, it will be showed as HHHHH.

4, Power Factor(PF) parameter: LED power factor can be displayed. (PF is a very important parameter for LED; Power factor for traditional lamp is only 1)

5, Annual Power consumption parameter: Annual power consumption display area: Annual power consumption can be displayed (ten hours power on per day)

6, Frequency parameter: Frequency display area: The frequency for relative state grid can be showed. Some frequency abroad is 60Hz.

7, DC Power parameter: The power of the DC12V lamp can be tested.

Annual Power Consumption setting:

There is a small button on the left down corner of the AC 6-in-1 meter, you can adjust it by press the button, set from 1 to 24 hours of annual power consumptions mode, the annual power consumptions is calculated based on 365 days in a year.

Packing instruction
Packing: Paper Cartons, with EPE foam holders inside, suitable for international transportation.
Product size: L48*W36*H6 (Unit: Cm)
CTN size: L47*W39*H18
Net weight: 5.5KG
Gross Weight: 6.5KG
Volume weight: L56*W44*H14

Accessories: Power cable X 1PC, extenstenion T8 cable 2PCS, fuse X 3PCS, User Manual X 1PC,

Special attentions: When you test the Non-dimmable lights, you have to turn the button to the Non-dimmable mode, otherwise the light can not turn on or the data is wrong!